The circumstances under which a client’s certification may be suspended or withdrawn are detailed below.

  • The client’s certified management system has persistently or seriously failed to meet certification requirements;
  • The certified client does not allow surveillance or recertification audits to be conducted at the required frequencies, or prior to the expiry of their certification;
  • The certified client goes into receivership, liquidation, becomes the subject of bankruptcy laws, is convicted of breaking the law of the land or acts in a disreputable manner;
  • Non-payment of fees, or
  • The client has voluntarily requested a suspension.

SUSPENSION OF CERTIFICATION
The certification manager or technical director, in conjunction with a technical panel if deemed necessary, will authorise all suspensions either imposed or voluntary and agree/set the conditions with the client for restoration. The records pertaining to suspension will be retained in the client folder. The INSPEC certificate database will be amended to reflect the suspension. Under suspension, the client’s management system/product certification is temporarily invalid. INSPEC will inform the client of their obligations under the terms of business and to refrain from further promotion of its certification or use of marks, including where applicable INSPEC’s notified body number. In the event that a client fails to meet such obligations, INSPEC will use other measures as appropriate.
Failure to resolve the issues that have resulted in suspension in a time established by INSPEC (6 months) will result in withdrawal or reduction of the scope of certification.

REDUCTION IN SCOPE
INSPEC may choose to reduce a client’s scope of certification to exclude the elements not meeting the requirements when the client has persistently or seriously failed to meet the certification requirements. All such reductions will be in line with the requirements of the standard used for certification. The certification manager will make the decision to reduce the scope of certification and a record will be retained. The certificate database will be updated to reflect the reduction in scope. Where a reduction in scope affects product certification and the ability to apply CE marking, the client will be advised in writing of the constraints by clearly communicating the reduced scope of certification and updating all certification documents.

WITHDRAWAL OF CERTIFICATION
The decision to withdraw certification will be taken by the certification manager or technical director in conjunction with a technical panel if required, and a record kept. Upon notice of withdrawal, the client will be directed to discontinue its use of all advertising matter that contains any reference to certified status, discontinue the use of marks and where applicable the use of the INSPECs notified body number. In the event that the client fails to meet such obligations, INSPEC will use other measures as appropriate.

RESTORATION OF CERTIFICATION
Restoration of a suspended certificate can only take place after all issues have been resolved and verification of such resolution (audit/testing/other) has been undertaken within 6 months from the original suspension. Where scope of certification has been reduced instead of complete suspension of a certificate, this too can be restored following issue resolution and, where appropriate, an audit or testing/other method of evaluation has taken place to confirm and verify resolution. In all cases a certification decision will be recorded.