What should the CE mark look like?

The CE mark consists of the initials "CE" in the form as shown below.

For category III products, the letters "CE" shall be followed by the identification number of the Notified Body involved in the productiocontrol phase (Reference Module C2 or Module D of the PPE Regulation).   The "CE" and the NB number must have the same vertical dimension, which shall be not less than 5 mm.  This minimum dimension may be waived for small items of PPE.  The CE marking may be of any colour provided that it is clear and legible, and is not likely to be confused with any other marking.


<< Back