What should the UKNI mark look like?

The UKNI mark consists of the logo “UKNI” alongside the initials "CE" in the form as shown below.

UKNI

For category III products, the combined logo "UKNI-CE" shall be followed by the identification number of the UK Notified Body involved in the production control phase (Reference Module C2 or D of the PPE Regulation).

UKNI No Vert 

 

UKNI No Horiz

The “UKNI”, and "CE" must have the same vertical dimension, which shall be not less than 5 mm.  This minimum dimension may be waived for small items of PPE.

The UK Notified Body number must be clear and legible – we recommend vertical dimensions be not less than 2 mm.

The UKNI marking may be of any colour provided that it is clear and legible, and is not likely to be confused with any other marking.

<< Back